INOX MX 9

NOX-mx9 No Chukka Chain Lube is a superior grade, high speed, extreme pressure chain lube formulated with special tackifiers, coagulants, anti-corrosion and water proofing compounds to make it stay on the chain, hence the name 'No Chukka Chain Lube'. INOX-mx9 No Chukka Chain Lube contains the extreme pressure friction modifier PTFE (polytetrafluoroethylene) which gives increased lubrication, reducing wear and also helps in reducing operating temperatures. INOX-mx9 No Chukka Chain Lube is highly resistant to salt, chemicals, water wash out and drying. Because of its' heavy duty, highly tackified mass and extreme pressure lubricating ability, INOX-mx9 No Chukka Chain lube can be used in other lubrication applications, such as small ball and pin bearings, bearing slides, metal bushes, winch cables, etc. DIRECTIONS FOR USE It is recommended to clean the chain first by spraying it with INOX-mx11 Chain & Brake Clean. This will clean the chain and leave it dry in a few minutes with no residue. Next spray INOX-9 No Chukka Chain Lube directly onto the chain. NB. Using the extension tube attached to the spray button will give the best results for accuracy and concentration and reduces the problems with over spray. Allow a few minutes (3 to 10 mins depending on the ambient temperature) for chain lube to penetrate the chain linkages and for the solvent carrier and propellant gas to evaporate.